What’s the most efficient method for painting tongue and groove paneling during a home renovation?
Asked by Liesa Carstensen 
6 months ago
Last Updated: May 28, 2024
Hey everyone, do you know the best way to paint this kind of tongue and groove paneling? I’m in the middle of a home renovation and all of my walls are covered in this type of paneling.
I remember doing that in my previous house. I ended up using a brush for the grooves and a roller for the wider areas. It was quite a tedious process. A paint sprayer would definitely have made it much easier.
I did mine in a similar way, just like .
If you can spray it, it will give the best results. However, I’m guessing it was previously brushed and rolled, so for a smooth finish with spraying, sanding them flat first would be necessary. It sounds like a lot of work to do all that. The simplest method is to brush the grooves and then roll them smooth
I’ll go with a brush first and then give it a roll.
Grab a caulk gun and apply caulk along each groove to minimize the appearance of cracks. ‘t forget to fill in the gaps near the crown moulding and baseboards before painting. After lightly sanding, either consider having a professional spray it or use a 3/8″ nap roller for maximum coverage on the wall, followed by a brush for the grooves. It’s quite a process to get it looking good. I actually like the current color you have. Maybe focus on painting the cabinets instead.
There’s no quick fix…. Brush, foam roller, and a little effort.
Try using a brush and roller combination. Alternatively, you could rent a sprayer. Make sure to thoroughly mask off everything except for the wall.
Consider applying at least two, possibly three coats. It’s not too difficult. Opt for a thicker nap roller to reach the crevices. The final result will be fantastic.
Spray the paint on and then use a roller for a smooth finish.
You will need primer and a brush for the painting project.
When painting, make sure to use a wide brush. Invest in a good quality one instead of opting for cheaper alternatives. Take your time and add a bit of flowtrol to the paint for a smoother application. Avoid rushing by trying to complete it in just one coat. Enjoy the process instead of rushing to finish quickly. Keep an eye out for drips and avoid overloading the brush.
I really like your cabinets! I’ve never seen cabinets with a line down the center that gives the illusion of 2 small doors when it’s actually just one normal-sized door. That’s pretty cool.
You could try using a thick nap roller, but your safest option (even though it takes time) is to brush the grooves first and then go over the entire thing with a regular roller.
I would suggest just brushing everything. I personally find that rollers create more work than they claim, unless you’re painting sheet rock.
Using a thick nap roller will help get into the grooves while painting walls