What gauge wire should be used for an oven installation if the size cannot be determined from the provided information?
Asked by Ryan Slawa 
5 months ago
Last Updated: July 26, 2024
I’m not sure what size wire is needed for the oven. It’s hard to tell from here.
Looks like either 10 or 12, depending on finger size
Might be 3/0, but I’d need a clearer picture to confirm
Seriously, on what planet would 3/0 be suitable for a range?
Hower hey dude, I might have mentioned a 3”x1/4” bus bar..
Hower haha, it could be from the neighbor’s service a couple of miles away 🤣🤣
Wow, you must be way smarter than me because now I’m totally lost.
Hower I’m not quite all there mentally..
Hower is just trolling
Ph Tommy Mohaupt
Ph Tommy Mohaupt Thanks for sharing your thoughts…🙄
Looking for a place to call home.
The wall stand-alone oven requires a 10 AW 30 amp power supply, while the oven stove combo needs a 6 AW 50 amp power supply.
Is right
Why did choose 6 for 50 amps?
Travis ravitt needs a 6-3 wire with a double 50 for an oven with burners.
I go by 8 on the handle 50. I’m currently in Chicago where we always use conduit for our wiring. Maybe a 6 would be better for x, but generally 8 works well for most applications.
That’s hilarious! I’m actually in Arizona. It seems like whenever someone says things are different back home, it’s always about Chicago. It’s kind of strange. Things are definitely unique out here.
Travis ravitt doesn’t use romex.
The white wire is labeled 12AW.
Seems to be a 10
I think 12awg would be a good choice
It’s okay to make mistakes, that’s why there are nameplates! 😄
Indeed
If everyone else is mistaken, then you must be mistaken as well.
Exactly right…..
Eorge Wells
I was referring to all the answers before.
Seek help from an electrician if you are unsure from this call.
Red wire is labeled as 10
It actually does not
In my opinion, , it appears to be a 10 🤙🏼
You know, , the wires that come out of ovens with the greenfield flex whips are usually smaller than the feeder size
I’m with you on that,
Hey , they overlooked the mismatch in stranded 12/10, but it actually mentions 10
Yep, I saw that even without zooming in 😆
Ha! cracks me up
Said that the white wire indicates 12.
Noted that the black wire on top is labeled as 10AW. It’s common for the neutral wire to be smaller since it’s typically only used for lights, timers, etc. The best advice is to always refer to the name plate label.
Was right.
‘s white wire is marked as 12.
Sure, here is the rephrased text: ” lol”
Mentioned 12.
Hey, It’s usually size 10.
Hey, It’s typically size 10.
Hey, make sure to also check the black wire for size 10.
Is this photo taken from the oven or the feed? If it’s from the oven, it’s probably #10. If it’s from the feed, it would be romex, so use #8 (stranded).
It all depends on whether you have a single or double oven. The number of breakers needed could be 10, 8, or 6, depending on what the oven requires and the type of wire coming out of the wall.
The ground is the only one missing information. The CC labels are quite visible.
I’d go with a 6-gauge wire, but it really depends on how far away you are from the panel.
‘t forget to check the last item!
I think it’s probably 12AW, but it’s best to check with your oven. I would recommend using 6 or 8 AW to be on the safe side.
Seems like the 14 or 12 awg thhn is completely incorrect.
Check the information on the nameplate.
The cable needed is 6/3.
The wire should be #12, indicating that it is too small.
The AW is listed on there! But make sure to check the plate details. It’s also a good idea to review the load requirements when determining wire size.
What type of oven is it, is it a built-in model with a separate cooktop? I would recommend using 6-3 w wire, a junction box, and wiring both in, as it’s allowed by code under the tap rule!
When it comes to oven wires, the size may not be an accurate indicator as they are designed for high temperatures and have different ratings than NM wires
Those wires appear to be for the oven’s pigtail.
Just give an electrician a call
Is it a gas stove?
That’s a dozen, and if your oven isn’t gas, I wouldn’t recommend using it with that.
That’s the 12th one, rated for 20 Amps. An oven should be rated for 50 Amps.
No matter how big the oven is, you can determine its size by looking at the kilowatts it uses.
It could be either #10 or #12, but if the appliance is UL listed, you’re clear to proceed with installation as recommended by the manufacturer.
Number ten
You’re going to set the place ablaze, haha.
That’s too small, consider using 8/3 wire for a 40 amp setup.
Combine all of the components!
On the third day of June
Send 12s on 50!
Make sure to take a look at the oven’s nameplate for the amperes and watts. This will help you determine the correct circuit breaker and cable size needed.
40 amp breaker for 6/3 wire.
The white wire seems out of place.
The information is clearly printed on the wire. If you’re having trouble reading it, maybe it’s best not to mess with it
8 is the best
240 volts?
6/3 on a 50amp is the way to go for best results. Others choose 8/3 on a 40amp breaker.
Hey, I usually use 6/3-50 for this.
Hey, most ovens require a 240v 4 wire connection at 40 amps.
Hey, Wilson 8/3 means there are 4 wires excluding the ground.
Wilson from Massachusetts follows the new constitution. We use 6/3 wire for the oven all day.
Is well-informed… I’ve been in this field for a long time and have participated in many code panels. Just wanted to point out the most common issue…
Thumbs up from !
I literally observe it stamped on the wire. The number before AW
11 AW wire gauge.
It’s best to hire an electrician
3/2 x with a grounding wire
It’s better to use a solid wire instead of stranded wire.
What do you do for work? I could use some free advice from you too…
Haha, , an accountant? I don’t think so
I would bet on either a plasterer or gardener for that,
In my country, we typically use 6mm cables
That’s too tiny for an oven
That’s the wire from the oven – it’s UL listed with a 150° Celsius insulation rating. You can’t just go buy that wire and install it yourself. Make sure to use the nameplate rating for the minimum circuit ampacity. Basically, call an electrician before you risk burning your house down.
Which oven requires a 20 amp breaker? mentioned that 12 gauge wire is suitable for it.
Hey Tyson, check out this chart for appliance use. Not all 12 gauge wire is rated at 20 amps – it varies based on the insulation’s temperature rating. Just a reminder, please don’t try to act like an electrician if you’re not one.
Here’s another clue: Number 12, 150 degrees Celsius, and column 42 amps! 😂😂😂😂
Hey, no need to be rude online. Just so you know, I’m still learning as an apprentice so I’m not trying to act like I know everything, okay?
I can definitely read, dip shit
Toaster?
6/3 50 amp