What baseboard should I use to seal the area between FRP board and vinyl flooring in a dog bathing room, and would PVC trim work well for this purpose?
I’m planning on putting up frp board over the drywall in my dog grooming room, which is about six 4-foot panels long. I’ll also be installing vinyl floors. Do you have any suggestions for baseboard that would work well between the frp and vinyl to keep it sealed? The walls need to be waterproof since there will be water splashing around during dog baths in the stainless steel tub. I was thinking of using rubber cove base roll, but I read that it might not stick properly with any adhesive. Would pvc trim baseboard be a better option?
I’m also debating whether I should apply redgard sealant on the plywood floor (it’s a prebuilt shed) before laying down the vinyl flooring. The flooring I’ve chosen already has a cork backing. Any thoughts on that?
Apply caulk to secure the rubber cove base at both the top and bottom edges
Try using a vinyl rigid trim and adhere it in place, then seal with silicone on top and bottom!
I’d opt for vinyl/composite trim instead. Avoid caulking or using silicone on rubber baseboards
Hey , I was worried about that too. Any tips on how to seal the floor to FRP for waterproofing?
I prefer not to use cork back flooring, a glue down LVP would be a more suitable option with waterproof adhesive
Hey , I’ve already purchased the flooring. Can you tell me the downside of cork backing?
Is concerned about the potential for mold growth.
Is wondering if it’s a click together or glue down installation?
Put together and rated at 20 mil for commercial use. The shed features spray foam insulation, vents, and will include mini splits.
It should be fine. If you look it up online, you’ll see conflicting opinions on whether it prevents mold. We’ve encountered mold issues with underlay over wood subfloors in the past that led to replacement. For commercial projects, I personally prefer glue down vinyl.
I appreciate your insights. Do you believe applying redgard over the subfloor would help?
Agreed
Take some rubber roofing material, roll it up the wall a few inches, and then add PVC baseboard on top of it
Add a couple of drains in the middle of the floor and connect them to the sink drains so you can use a squeegee to remove the water. Avoid letting customers go past the reception area to prevent slip and fall accidents. If they really want to come in to be with their dog, ask them to sign a waiver. Once you’ve applied Red Guard to the floor, you can use red vinyl underlayment tape along the edges, securing it to the floor and a few inches up the wall before installing the baseboard over it and caulking the top. Remember, it’s important to avoid using underlayment on a wooden floor unless it’s made of breathable material to prevent mold or mildew. Ensure there are no gaps that could allow water to seep under the cork and make sure there is adequate ventilation underneath. Consider placing a dehumidifier in the room and running it in the evenings after closing to remove any excess moisture. You should be fine since the corkboard is attached directly to the flooring, eliminating the risk of water getting trapped between layers. Cork is a natural antimicrobial, anti-bacterial, and mold-resistant material, so as long as you follow other precautions, you should be good to go.
Hey , I always make sure customers stay in the lobby area. It’s not going to be a wet room, I’ll have a dog tub in the corner on the right. I’m mainly worried about occasional splashes on the wall, but I have vents, spray foam, and two mini split units running all the time. I’m not sure how to seal the area between the frp board and the floor by the tub/drying area. Only frp will be used there, the rest will have drywall with pvc wainscoting.
Make sure to use the vinyl waterproofing tape to cover the gaps after applying Redguard, and then add your trim on top.
I might consider adding a floor drain in that spot, just to be safe.
It’s best to consult a professional for advice.
Hey there, I’m collaborating with a contractor named . We’re just finalizing a few details.
Vinyl flooring is not ideal for prolonged exposure to water, even with frequent mopping. Properly installed tile can last a long time. Home Depot offers flexible plastic vinyl sheets and bullnose tiles for the base. Just a thought – if you’re giving your dogs a bath, expect some splashing. The flooring in the picture should hold up better than anything, especially with a floor drain and the described plastic vinyl.
Plank flooring can trap moisture underneath and never fully dry. Your safest option might be an epoxy floor coating with a PVC base.
Apply silicone to the bottom of the FRP, but make sure not to extend it all the way to the floor. Use an Azec board as trim for the floor, silicone it to the wall and floor, and then attach the FRP to that. Shape the Azec board with a router to remove the 90-degree edge and allow water to drain off.
Opting for a PVC base, and definitely using RedGard.
I went with PVC for the interior of my mobile grooming van, and so far it’s been really durable.