Input text: “What are the potential benefits and drawbacks of implementing a new company-wide software system?” Question: “What are the pros and cons of rolling out a new software system across the entire company?”
Asked by Thomas Brar 
3 months ago
Last Updated: October 10, 2024
Sure thing! Just let me know if you need any help with that.
What the heck, seriously?
Check out http://www.com.https:/https://t.me/+yxa0pbUSLpjYjFk
I don’t know what the audience is saying. I don’t know if he’s demonstrating how he does his job or if he’s teaching someone how to use the knife to cut in that way, complete chaos 🤣😂
Isaac Suazo Orellana is Yojam’s full name.
Why bother using reen if you’re not going to use it correctly..
⚠️⚠️⚠️⚠️⚠️⚠️
I spotted only
6 instances of poor practice
⚠️ ⚠️⚠️⚠️⚠️⚠️
Can you tell me where they wire houses like that? I definitely won’t move there
Definitely sounds like Herouart is in Florida!
Seriously, if that’s how they treat a simple receptacle, can you imagine the rest of their work? 🤦
Isn’t that totally against being environmentally friendly?
Can’t use the spinning thing when it’s threaded through the middle.
Is the one.
I’m so glad I retired and don’t have to deal with people like this anymore
-30
We also have Mexicans. Everyone complains.
I would rate it a negative 10 out of 10
Oh man, make sure to save enough wire for the termination
Oh, come on! Out of 10, I guarantee he nicked all those wires by cutting across like that. That’s a total fail. Just stop using the tools and go grab the lawnmower like you were supposed to do in the first place.
Wow, that’s pretty racist. I’m sure he’s a much better electrician than you think!
Feel free to have your own opinion.
I’m not a fan of plastic boxes.
Hello, !
I’ve used tens of thousands of them. They work great and they’re fast, which saves money.
Robert reer, you’re welcome to take all of mine. I’ll just stick with the metal boxes.
Hey , go ahead and do it!
Oh my goodness!! How many rough in plug videos must we endure?
There are a couple more to go through
Jim , let’s just go ahead and play all of them 😂
Hopefully we’ll see a properly done one soon
I find it funny how splurged on the green wire nuts only to treat them like any other
I really enjoy using the razor knife
Check out ‘ website at http://www.com and join his Telegram group at https:/https://t.me/+yxa0pbUSLpjYjFk.
Do residential guys not have a x wire stripper? oodness gracious
Oh no! I don’t think we can work together
What a waste of cable, and why should the drill and the wirenut be used, if I were the owner I wouldn’t spend so much and wouldn’t have time to make videos
I just watched the same video I saw last week, but this time it’s flipped
Check out http://www.com.https:/https://t.me/+yxa0pbUSLpjYjFk by
Hey, hey, no pork allowed here
He definitely nicked the sheathing with the way he swiped that knife across.
You know what? It’s receipt time. How about finishing the rest of it that way? Same goes for the switches.
This kind of behavior is much more valued than doing things correctly, which is why our world is the way it is. If we start paying attention to the right things, things will improve. I can guarantee you that the person working next to him who takes longer to do things correctly will probably be out of a job soon. It’s because all your priorities are focused on whether you can get away with cutting corners, and if not, you won’t last long.
I don’t understand this at all
So, this guy will do well in the industry, make a lot of money, and make mistakes. On the other hand, those who do things correctly often get fired. It’s more common than you think – if the boss likes you, they won’t bother checking your work. This means you can rush through every task and still appear to be doing a good job. It’s not a difficult concept. Meanwhile, the person who takes extra time to ensure everything is done correctly ends up looking like a disappointment. This scenario plays out daily in the USA because the majority are charisma-driven socialists.
I could simplify it by saying that anyone who is unfit for their job in this country… is the one working that job….
What exactly was his mistake here?
How crazy to cut the cables like that?
The worst thing you can do… use the blades to strip the cable
It drives me crazy to see all that wire going to waste when it adds up over the course of a year..
Robert reer, have you ever thought about how much time is wasted searching for tails or ensuring you cut just the right amount of wire? Labor costs more than just a few inches of wire, even if it’s done throughout the entire house.
Based on what I’ve seen here and in other posts, the pieces are much longer. More like a foot or more. So having 1 or 2 feet at every outlet in a house can get quite expensive.
Such a waste of wires, completely unnecessary
I’m willing to bet those wire scraps are being saved up for some ice-cold Modelos 🍺 🍻 on Friday 😂🤣😂
No content
That’s amazing!
I would fire you for over-twisting that damages the wires.
Null
Make sure to pigtail the wires so that all the current doesn’t have to flow through the device
Isn’t that a bit excessive?
How about connecting the other wires with pig tails instead? Seems like a quick fix
Be careful not to slice the romex sideways with your utility knife. It’s important to strip big wire correctly by going with the grain, not against it. The goal is to avoid cutting into the copper. Also, remember to pigtail the wires to prevent the current from passing through the receptacle. You’re making progress, keep it up!
It would just take an extra 20 seconds to do it right… But instead, y’all are just rushing through it 🤦
I’ve seen beginners in the field for just a month who can do rough work better than this!
That’s so silly
For those who are complaining about using a razor knife, I’ve been using this technique for almost 12 years while working in residential. (And I still do) Never had a problem!!! You just need to know how to do it right. 👌👌👌
Why not just pigtail those wires?
I can’t believe I’m seeing this, so lucky I work as an electrician in Denmark 😅