How can I safely remove this glass without damage, as it was put on before the paint fully set and now looks bad underneath?
Asked by Alex Johnson 
1 month ago
Last Updated: October 15, 2024
Hey, does anyone have any tips on how to safely remove this glass without causing any damage? It looks like the previous owners put it on before the paint fully dried, and now it’s not looking so great underneath. I really want to salvage the glass if possible.
Additional info: When we first moved in, the cabinets had just been painted and the paint took forever to fully dry. As a result, the glass got stuck to the paint on the counter.
If it were me, I’d get a thick board cut to size and have a few people slowly lift one edge while sliding the cut wood underneath. I’m sure there are better methods out there, but that’s the first idea that came to mind when I saw this post.
Unfortunately, the glass is stuck to the counter and I can’t slide it off. I’m trying to figure out a way to unstick it without breaking it.
What’s up with that? Why would they do that? Mine just sit there and don’t move.
Most likely unintentionally.
https://a.co/d/6ugF5jc
That glass is thick and tempered. It would require quite a bit of force to break it. Have you attempted to slide it out? Please explain where you’re encountering difficulties with the methods you’ve already tried.
The glass won’t budge because it’s stuck to the freshly painted cabinets. The previous owners had just painted them before selling the house, and the paint they used was so sticky that the doors would even stick when closed. So, the glass was already glued in place when we moved in.
The glass costs around $15 to $20 per square foot. Make sure that whatever method you use to salvage the glass, the cost doesn’t exceed its value or become a major concern.
Thanks for the information. This is approximately 6 feet in width and the same depth as a regular counter (around 2 feet I believe). So, the estimated cost of replacement would be $180 to $240. 🙂
Interesting challenge! It seems like you can only reach one side. Have you thought about pulling the cabinet out to access all four sides? Or maybe removing the entire top (glass + wood)? If you could find a way to improve your access, you could insert shims all around.
The cabinets can’t be moved. Replacing them would be necessary.
I’m also struggling with getting rid of the glass. It seems to be stuck on the counter. I’ve edited the description to provide more details.
Score the glass with a knife as much as you can. Then, use suction cups and start lifting the front edge upwards. It might flex a little. It appears to be only 1/4” thick. I’m skeptical that it’s tempered.
Thanks, Chris! I’ll give it a shot.
Have you considered trying some heat?
I haven’t tried that. Another person recommended it too, and I believe it could solve my problem. Thanks!
Maybe that, plus a bit of convincing, could work haha
Thanks a lot, !
Just grab a budget-friendly heat gun and heat it up, it should come off easily
Oh, I think this could be a good solution! Thanks!
https://www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwiH4a3llu6FAxVDaUcBHTHiB9AYABAJgJxdQ&gclid=EAIaIQobChMIh-t5ZbuhQMVQ2lHAR0x4gfQEAQYBCABEgLU4fD_BwE&ohost=www.google.com&cid=CAASJeRolmwfU0A2VMNh0iaVd5Seu3yhnweKqm0O2QqZZmlfQW-dfiY&sig=AOD64_3EbquB5R6ITZgmwV1_nXSM8A&ctype=5&q=&ved=2ahUKEwiCrafllu6FAxUHM1kFHbJNDNkQwg8oAHoECAQQHQ&adurl=
Consider using a glass suction cup similar to the ones shown in the comments to lift it and then slide a rigid and thin object between the glass and cabinet to break the seal of the paint. You can find a small thin piece of sheet metal at Home Depot, for instance. You might have to gently pry with a drywall taping knife to create space for the metal to slide in.
No content
No content
No content
The trading community, while humble, is brimming with seasoned traders who are always eager to share their knowledge, strategies, and insights. Whether you’re just starting out or a seasoned trader, this community has something valuable to offer to everyone.
Cover it with contact paper
🤮
Seems like the trim is securing it in place! Begin by gently removing that using a 5-in-1 and a glazing bar. Then, you can attempt to slide a putty knife or 5-in-1 between the glass and countertop, and gradually work it back and forth!