How can I prevent this from rusting?
Asked by Teobaldo Vieira 
8 months ago
Last Updated: May 6, 2024
Does anyone have any suggestions on how to prevent this from becoming rusty? Thanks a bunch!
I’m not happy with those lights. I spent a good amount on mine but it began to rust after just 2 years. I had to do a lot of work to fix it.
The cost and time to clean it up are not worth it, just buy a new one from Home Depot or Walmart for less than $25.
You might want to invest in a higher quality bathroom fan.
Those lights are really affordable. You should consider getting a new one.
To clean it, start by removing the bulbs and then carefully take off the trim around the sockets. Then, remove the panel and use a gentle SOS pad to clean it.
Swap it out.
These fixtures are the most affordable you can find right now. It’s not worth the hassle trying to remove the rust. Spend about 20 dollars at Home Depot for a new shiny fixture. If it were up to me, I’d toss out the old one and invest in a brushed nickel fixture that you truly adore, and it will last much longer.
Do you think it’s simple to find a replacement for me? This marks my debut residence.
Lorianne Dennany, exactly.
Just flip the breaker off. Check out some YouTube tutorials.
I handle all my electrical work myself.
Thanks a bunch!
Lorianne Dennany, it really makes you feel empowered!
I bought mine for $6 on amazon a decade ago. Consider splurging a bit more for a better quality.
I suggest just replacing it. I also recommend using a dehumidifier in the bathroom and running it while you shower😉
Toss out the entire house and begin fresh
Lorianne Dennany, I appreciate you joining me for my Ted talk
Please inform my landlord for me
Null
Swap it out for a light that’s more up-to-date
I believe they’re around $50 at Lowe’s. I got a new one. Simple. Or you could always paint it haha
O ahead and get a new one and make sure to put in a good FAN. Remote fans are the way to go. Those fan/light combos are no good.
You could opt for replacement, but cleaning with steel wool and applying a clear lacquer aerosol could also work.
Spray some WD40 on a cloth and use it to polish the surface.
Rub the surface using a balled-up aluminum foil.
Sure, remove it and dispose of it. Have a great day
O ahead and switch on the exhaust fan
Replace that
You can get a replacement for just 50 dollars
Remember to turn on the fan while taking a shower
It’s best to replace that because it’s not very attractive.
Please inform my landlord
Save yourself the trouble… Cheap quality from the builder.
Rab a cloth and some brass polish to remove any signs of corrosion.
Next, make sure the unit is turned off.
Clean the unit with acetone or alcohol and let it dry.
Put paper towels in each bulb socket.
et a can of Rustoleum clear spray paint in satin finish.
Spray 2 to 3 thin coats and let it dry.
Hang up the fixture with the bulbs again.
ood luck!
Points out that Rustoleum will be almost as expensive as replacing the unit. While he agrees with your approach, he mentions that this unit is one of the lowest quality options on the market. Repairing it may not be worth the effort.
Suggests using Krylon or another clear coat for sealing. He is familiar with fixture prices after 34 years of remodeling work.
Exchange it for $40
I know this unit pretty well. The best solution is to swap it out.
This is an inexpensive unit sold at Home Depot, Lowes, or Menards. It’s commonly used by house flippers. It has a short lifespan and limited repair options.
I’m just renting so that definitely adds up. I really appreciate it!
Swap it out
The only reason I didn’t think of replacing it first is because I’m renting.
Thanks to everyone for sharing their thoughts.
You should really consider replacing that $29 piece of junk. Seriously, it’s only going to get worse and it’s so flimsy that you might only be able to clean it once before it falls apart completely.
It’s not expensive to replace.
Try using tin foil to gently rub it off, that should do the trick.
This is seriously the best!