How can I match the new repair color to the original color after cleaning and removing discoloration from the brick work left by the previous owner?
Asked by پرهام نجاتی 
2 months ago
Last Updated: July 26, 2024
Does anyone have suggestions on how to match the new repair color more closely to the original color? I cleaned and removed the faded discoloration with a clear solution, but it just seems to make the new brick work stand out more. The previous owner did a brick job that I’m trying to fix, so any advice would be greatly appreciated. Thanks!
Should we paint everything with the same color?
How about painting the cement between the bricks in a nice gray shade?
Try power washing the remaining brick to see how it turns out.
Not matching the mortar was a big mistake on their part. Make sure to purchase some cement stain and apply it to the mortar, but wait 90 days before doing so.
To get a match, you’ll have to paint, stain, or white wash the brick.
Consider staining the brick.
I’m not a big fan of it, but painting it could be considered.
The mortar color they used was incorrect. You could try using a concrete stain and brushing it on the mortar to make it darker.
I’m totally on board with , 100%.
Exactly my thoughts!
I totally agree with you, , the brick is nice but the mortar could use some improvement.
Oh yeah, , the key is the mortar, not the brick.
Feels the same way.
Thinks it’s great.
You could experiment with coffee or dirt. Some parts have been through rough weather. You could also attempt powerwashing the remaining areas to see if they match the color better.
Use a single shutter to conceal it. Install shutters on the other windows facing that direction
Spread dirt on the cement, then rinse gently. Eventually, it will blend in more
Clean it using mud
Just wait a bit. It will gradually transform and appear very similar.
In 40-50 years, you might not even realize.
Give it a spray with brewed coffee
Paint everything!
The brick color isn’t actually that far off. The mortar residue is lightening them, along with the incorrect mortar or grout color. After the bricks have fully dried, clean them to eliminate the extra mortar. Then use a stain, dirt, coffee grounds, or anything else to darken the grout lines to match the current ones.
If you want, you could consider staining the mortar. There are companies that offer consultations to help with color matching.
I don’t think that new mortar matches well.
Let’s start by darkening the mortar color.
Brick & concrete stain…. You should try to find a solid color stain that closely matches your existing brick color (they can customize the color of the solid stain). Make sure to also get a stain for the mortar to ensure a good match. It might be a good idea to start with the mortar to see if it helps blend the colors together. This method is effective and will completely transform the color without harming or blocking the brick. Simply use a paint brush for application. One coat is all you need, and it will be permanent.
Hey , I was wondering if the lightest grey color you used was actually a stain?
Hey there! mentioned that you can choose any color for the stain. Industrial grey was used for the lightest shade and cracked pepper for the darkest. For the shades in between, a mix of the 2 colors was used to create more options. Check out the before and after photos!
Can you tell me which brand it is and where you bought it from?
Is so talented!
Hey, have you heard of ?
Thanks a lot, !
Hey , the chimney looks even better now.
Nice, !
It won’t ever be a perfect match
A local masonry company might provide staining services. They can stain both the mortar and the brick, and you’ll barely notice it!
Mix together dirt, oil, grime, and anything else that could be tinted, then scrub it in with a scrub brush. Best of luck! Just kidding…it truly doesn’t know.
Begin with a thorough power wash.
Power wash before staining.
Maybe I should have considered that when I was mixing the mortar 🤷🏻♂️
Acquired his home from a house flipper!
Match the stain.
Scrubbing dirt?
Concrete stain and dye are not the same thing. You’ll want a translucent dye to darken the brick a bit. Stain might only impact the cement grout. It seems like gray would work, but I think brown would be more natural on the brick. Avoid big box stores – they offer limited color choices. Head to a paint store for a wider selection. Start with a small sample to test the color, as it can be tricky. Plan on making multiple trips to the paint store. That repair job looks really nice – now you just have to conceal it.
That looks to me like a really nice patchwork. If you give it a good scrub with a stiff bristle brush or broom, it could look even better. I would wait around 90 days for it to cure and get that aged, weathered look before sealing it all up. ‘t forget to pressure-wash the rest of the house and seal it too. Once it’s aged and weathered, roll on some Thompson’s water seal. The sealer will make the mortar look darker and wet, just make sure to wipe off any excess first.
Let’s throw in an extra window
Oh no, they actually took out a window! must be laughing out loud.
Grab a concrete drill and collect samples of the brick colors you’re looking to match. Gather the color dust from the samples and attach them to 3×5 cards to create small quarter-sized samples. Bring these to the hardware store for paint matching. Remember to fill in the holes with caulk or putty and touch them up as well. Make sure not to take samples from too close together to maintain the structural integrity of the building.
Just wait a bit and let nature blend the grout for you.
Would it be a good idea to stain it with coffee to help give it an aged look?
You’ll never be able to match it perfectly, so the difference won’t be noticeable. It seems like there used to be a larger window. Why not remove the new brick and go back to the original window size? This would drive me crazy.
This situation is really frustrating me, but I can’t go back now since they needed that space for a full bath in that corner of the house. I have an idea of what I can do, but I wanted to check if anyone else had better ideas. Do you have any suggestions?
If you’re not up for painting the entire house, you could try scraping off the stark white paint from under the window and filling the cracked section with a dark sand or rose-colored grout. To cover up the miscolored area, consider adding an accent shingled wood section. You might also want to do the same on the opposite side of the window for a symmetrical look. Plant some bushes and flowering vines around to enhance the overall appearance. It might be difficult to match the brick exactly, so focus on making the repair blend in seamlessly.
How about power washing the old brick and mortar, and then maybe staining the new to match?
He mistakenly chose the incorrect brick and mortar, resulting in a messy permanent situation
I’m just trying to get it as close as possible. Is it driving you crazy?
Don’t bother cleaning it, just darken the mortar. Let it get dirty.
Hey , trust the restoration experts, they are knowledgeable.. they deal with brick restoration frequently, it’s difficult to always find a perfect match unless it’s custom made. Natural elements and time make it nearly impossible to match mortar exactly.. but the restoration experts would be aware of the techniques…
Hey , don’t pay attention to him, no one is flawless and I believe it’s a job well done. Grab some mud, rub it in, and eventually it will blend in.
That is revolting
According to , nothing lasts forever. It all depends on how committed you are to it.
Brick can be stained
Add some dirt to it
Consider installing a larger window
If budget permits, replace everything with a beautiful bay window.
Simply shift the window back. 😊
You have the option to stain the mortar or use ink stain to paint all the brick a different color for a more cohesive look
The brick seems to be a pretty good match. If you call a mason, they can grind out the messy mortar and tuck point it with a better matching one. Doing it yourself is also an option, not too difficult of a task. It will require tuck pointing tools, a grinder with a diamond wheel, and proper safety gear. Make sure not to inhale the dust. The most challenging part might be getting the mortar color right. The color of the new mortar will change as it cures over days to weeks. It might take some trial and error, allowing time for the mortar to cure, to find the right mix. A skilled mason should have no trouble matching the mortar. You could consider cleaning up the mortar and staining it, which is easier but may not last as long. Any fix will be noticeable, but it could greatly improve the current appearance.
The brick isn’t exactly identical, but it’s pretty similar. Fixing the mortar would really improve its appearance.
Dirt
You might want to consider painting your brick for a fresh look 💡
It’s only the mortar. Just rub a little dirt on it haha
I totally agree with . This could definitely work.
Have you considered using a grout color pen? It could be a great solution for updating the look of your tiles. Check out this one: https://www.amazon.com/Grout-Brown-Tile-Paint-Marker/dp/B09GG7QLBR/ref=asc_df_B09GG7QLBR/?tag=hyprod-20&linkCode=df0&hvadid=563647170124&hvpos=&hvnetw=g&hvrand=6969167201842256236&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9022035&hvtargid=pla-1607732215653&psc=1&mcid=846bd6bc3e9735e3b526e13823e2a8a9&gclid=Cj0KCQjwwMqvBhCtARIsAIXsZpZ88nLBstueReVZkR9QLcfnDL_77q4uRwuxJM-PGuuZK2CCvidBGyMaAm_MEALw_wcB
Just wanted to mention that I’ve been told I’m color blind, so feel free to do your own color matching!
Consider installing double windows