How can I effectively repair a crack in my LVP flooring to prevent further damage if replacing the piece is not possible?
Asked by Fernando Amador 
2 months ago
Last Updated: August 3, 2024
I just noticed a crack in my LVP flooring. I can’t remove and replace the piece, so what’s the best way to fix the crack and prevent it from getting any bigger?
You can either remove the piece and replace it, or you can choose to leave it and allow the crack to worsen. There is no middle ground.
I agree with you, .
Hey , maybe you should consider leveling the floor. LVP doesn’t just crack on its own, there might be an issue with the flooring underneath. If you don’t address it, the problem will likely reoccur.
For CA glue, you can scrape off any excess using a razor. Or if you’re feeling fancy, you can opt for grey-colored hot glue. Simply use a hot glue gun to attach it, press with metal while it’s still hot, and then remove the excess with a razor blade.
I recently came across a video about this. Let me see if I can locate it.
https://www..com/reel/342083971889523?s=yWDuG2&fs=e&mibextid=Nif5oz
The crack likely occurred due to an uneven floor underneath. To permanently fix it, you may need to remove the floor, level it, and reinstall. I understand this may not be the ideal solution, but wanted to provide you with all the necessary information as the crack could reappear despite your efforts.
Hey , that’s spot on!
I’ve been using Robinson vinyl and LVP repair for filling in chips and gaps. It’s been working really well for me. You can get a 3oz tube for $7 from Home Depot, and it comes in several colors.
It’s not the ideal recommendation, but it’s doable. If you happen to have some extra LVP lying around, you could carefully slice off a sliver (slightly larger than the crack) from that piece. Then, glue it down with something heavy on top to hold it in place until it dries completely. Afterward, use a heat gun to blend the edges with the existing LVP. It’s usually better to replace the entire board, but that can be a challenging task depending on its location. I hope this suggestion helps.
You know, replacing it is actually possible, it’s just a bit challenging. I’ve tackled a few of these myself.
Hey, try not to stare at it and whatever you do, don’t step there again if you can’t replace it.
It’s simple to replace it, as long as you have an extra on hand. If it’s in your closet, you’re all set. Just take it out, swap it, and close the door. Voila!
When I was renovating my house, I did the same thing, . I was short a bit for my hallway, so I took a piece from underneath my stove/fridge to replace it.
Duct tape.
Here’s a tip: allow the adhesive to seep into the crack before applying the activator. Consider using painter’s tape to avoid any dripping or overflowing.
Carpet
Replacing flooring may not be as difficult as some people think, but I recommend leaving it to the professionals. It can easily turn into a disaster if not done correctly.
Hey guys, I understand that replacing the floor is an option. However, considering we don’t have the original flooring material as it was installed by a company nearly two years ago, it’s not a viable choice.
Hey , have you thought about using some glue temporarily to prevent it from getting any bigger? By the way, do you happen to know the company? They typically offer a warranty.
I wish I had an answer for you, , but unfortunately, I’m clueless. I’ll definitely give some kind of temporary fix a try.
Vinyl is being marketed as luxury, but it’s really just a rebranded DIY option from the 50s. While there are higher quality options available, they come with a price and proper floor preparation is essential for any flooring choice.
Reattach the broken pieces with super glue. Consider using color-matching plastic filler to fill in the crack.
When did you get the floor put in? I’d be concerned that even with repairs, it might keep cracking. You could send a picture to your local flooring place to see if they can match it closely for repairs. If it’s happening in one area, it might start happening in others. Other than that, I’m no help… haha