Has anyone successfully attached a heavy Murphy bed to metal studs and can provide advice on installation?
Asked by Mercedes Romero 
1 month ago
Last Updated: October 21, 2024
Has anyone here ever attached a murphy bed to metal studs? I’m a bit concerned that it might be too heavy. Any advice would be greatly appreciated, thanks! Oh, and just to clarify, the picture I’m referring to is from the seller I bought it from, not my own house.
Attaching to metal studs is pretty similar to wood studs, but make sure to choose the correct fasteners for a strong hold. Maybe consult with the metal stud manufacturer for advice on attaching various items, like kitchen cabinets. Just a thought to consider. I really love murphy beds – I made one before and it turned out great. It might be worth checking with the bed hardware manufacturer for any specific recommendations to ensure the wall can handle the weight/stress.
Hey , where did you purchase your hardware from? Can you share a link?
“I built a Bed” … I used pistons instead of traditional springs. This was in 2011 … and the kit cost me around $300 … I also used 5 sheets of plywood (plus some miscellaneous wood) … I even made shelves and a bedside table to match. I believe I recently searched for them online … Just Google it, they have plenty of options.
I believe metal studs are not as sturdy as wood studs. When installing doors on metal framing, adding a piece of wood can help provide more strength. The metal might flex, causing potential issues.
That’s a cool name haha
I don’t come across many of us either.
Oh, I don’t either, but I’ve heard it’s a popular name in the homeland.
The solution to this issue should be covered in the bed manual. Try checking the manufacturer’s website for a downloadable version of the manual.
#14 self tapping screws are the way to go for a sturdy hold.
‘t worry, I’ve assembled two Murphy beds before. The instructions might tell you to use a lot of wall fasteners, but it’s not actually that difficult to keep the top secure. Just make sure to use the appropriate fasteners for metal.
The joists above seem sturdy. Have you considered securing it to those?
Metal studs are sturdy, regular screws won’t do the job. You’ll need toggle bolts to go through the metal stud and secure it from the back.
No content
A murphy bed mechanism is approximately 3ft tall and can be supported with just 6 drywall anchors placed as close to the studs as possible…..the box that conceals it just needs to be secured into the studs, it’s simply a cover for the bed
Metal studs are equally strong to wood studs once they’re put into a wall.
Just remember, even though the bed itself is heavy, it’s not putting a huge strain on the wall. Think of it as a lever, so the full weight isn’t pulling on the anchors significantly. You should be fine.
We have one that was like a standalone cabinet. It’s just secured to the wall to prevent tipping when closed. They support themselves and don’t add extra weight to the wall.
The item you’re looking for is known as a toggler. You’ll need to drill a 1/2” hole through the metal stud and they can support at least 200 lbs each. Skip the old school toggle (butterfly) bolts, they can be a real pain.