Can anyone help with finding replacement torsion springs with brown ends?
Asked by Viljami Rintala 
5 months ago
Last Updated: June 28, 2024
Hey there! Just posted for the first time. I’m in need of replacing some torsion springs. Can anyone tell me if these are the ones with the “brown” ends?
Be careful because the left spring is still under tension. If you’ve never done this before, it’s safer to have someone experienced help you. Not sure what you mean by “brown ends.”
Hey, I need to find out the size of this spring. It’s a bit tricky to tell the color, but I don’t think it’s red even though the end locks are colored.
Springs are designated for left and right sides. The red color indicates the side it goes on and the direction to turn it. Sometimes they come in red and black, what you really need to do is measure the spring’s length. Take a photo and show it to a door company, they can help you get the right spring. However, keep in mind that there is a lot of tension involved. You’ll need to release the tension on the left side first before doing anything. Additionally, there’s a specific number of 1/4 turns per spring when winding. Overturning it can lead to snapping the new and old springs. You must count the turns indicated by the yellow marks or twists, starting from a straight line. Since you seem unfamiliar with this, it might be best to have someone experienced help you for the first time. You can observe their process, tools used, and learn from them.
There are standard sizes for springs. I’m trying to figure out if this one is considered a ‘brown’ size. It doesn’t quite look brown in person.
Brown isn’t relevant, what matters are the numbers: length, size, and rings per inch. The weight of the door determines the number of turns needed. Just be careful, those springs can be dangerous if mishandled.
There are specific colors that represent the spring season, it’s pretty basic.
Actually it’s a color code from Dasma, not universal, that rates the same 3 points I mentioned. Out of the 200 doors I service, none of them use Dasma because it’s still fairly new (mostly from 1996). However, since they merged with another big association in 2006, it’s becoming more common on newer doors in North America.
I find it strange that these springs are being sold everywhere in the US. I think I’ll chat with someone who actually knows what they’re talking about. So clearly, it’s not you.
Please be extremely cautious. Those can cause serious harm or even death. There is a significant amount of tension present.
Hey, I’m trying to figure out the size of the spring. Not sure if it’s brown or what color it is. I don’t think it’s red even though the end locks are colored.
Consider hiring a professional. I have personally completed many tasks like this and still ended up needing 32 stitches on the top of my hand. The wound exposed the bone and my hand will never fully recover.
I’m trying to find the right size spring, but I’m not sure about the color. The end locks appear red, but I don’t think the spring itself is actually red.
Take heed of the expert warnings, as this can be very risky. Leave it to the professionals. One small mistake could end in disaster.
The brown tip appears to have surface rust.
I’m trying to find the right size spring. I can’t quite tell if it’s brown or not. I don’t think they’re red, even though the end locks may suggest otherwise.
Thanks! I have a chart that’s similar. I’m struggling to determine if those are brown since they appear black in real life. But black isn’t a color code.
The color appears brown in the photo.
Consider hiring a professional. It can be quite risky.
I’m trying to figure out the size of the spring. I’m not sure if it’s brown or another color. Even if the end locks are red, that might not indicate the actual color of the spring.
There seems to be quite a bit of tension in that spring. As a former union construction worker, I learned that it’s sometimes best to bring in a specialist like an electrician (for breaker box work or 220) to avoid serious injuries or worse. Going to the hospital now with all the covid cases is no fun.
I replaced the opener on my own, but I’ll make sure to watch plenty of YouTube videos before attempting anything beyond my usual work. It’s always good to have a clear understanding of safety precautions before diving in.
Yup, there definitely is. Just trying to figure out the right size.
If you’re not sure what it is, it’s best to avoid attempting it
Hey Kevin, can you confirm the color at the end? I’m on a hunt for the right spring size.
It appears brown to me. I would avoid touching it. I’ve heard of some serious injuries caused by these springs.
Have a garage door specialist fix it up for you.
Hey Mick, I’m trying to locate the spring size. Can’t really tell if it’s brown or something else. I doubt it’s red even though the end locks are colored.
Check out the garage torsion springs available at ‘s website! They have a variety of sizes to choose from. Just click on the link to explore more.
Just spray some WD40 on them, they’ll be good as new
It seems rusty
Spray it generously with WD40, that should do the trick! I’ve replaced many of these before, just be careful because there’s a lot of tension. But in my experience, a good spray of WD40 should work wonders.
Haha, looks like you missed the break in the spring. Guess it happens!
Nope, I didn’t see it either. So, it definitely needs to be replaced.
Be sure to handle this with caution, it can be very dangerous. One mistake could have serious consequences!
The color you’re looking for is yellow, which indicates the line going through the spring. One line is broken while the other is fully wound up. If you don’t have the right tools to safely unwind the spring, it can be extremely dangerous and even fatal.
Part of my job involves making adjustments, but I recommend calling a professional garage door technician for issues like spring replacements, especially for double springs.
My local Home Depot no longer carries torsion springs for DIY projects due to numerous injuries. It may not be a universal policy, so they might still be sold in your area. These springs can cause serious harm.
Said they do. I’m double-checking to get the right size.
Bring in a professional
Hey , do you know the size of the spring?
Can you measure the color coated wires for me, but please don’t touch the spring? It’s better to hire someone else for that task.
Matt is spot on – this is definitely a job where having the correct tools is crucial. I’ve witnessed some pretty nasty DIY injuries caused by these springs.
It’s really not that difficult, but it can be dangerous. If you make a mistake with basic and clear directions, consider outsourcing the job. If not, invest in proper tensioning rods designed for the task to ensure your safety.
If you’re being too cheap to buy proper tensioning rods for $15, it’s best to just hire someone. Using non-purpose built rods, such as rebar that can break, is the number one way to get seriously hurt or worse.
I work with garage doors. Handling them incorrectly can lead to serious injury – it can take your finger off faster than a doctor can help. Use a garage spring wire gauge to determine the right size, typically around .225 wind. Remember, red and black ends indicate left and right positions, respectively, of the spring mount.
Thanks! I have the tools for unwinding. Just not sure about the size of the twist. The colors black/brown and yellow line are throwing me off.
Got it. The black/brown indicates different wear levels, if that makes sense. For instance, when twisted but not broken, or when oiled and exposed to more light over time, it shows more wear there. Imagine oiling a door while open, then closing it – you’d see streaks of oil due to the spring’s movement. Similarly, the yellow mark seems to be spray painted to indicate wire size, to avoid measuring each one. Each wire size is painted a different color for easy identification. When I worked at an overhead door company, yellow was used for .225 wire size.
I appreciate it. That totally makes sense. The various paint colors I was considering to determine the size were throwing me off.
Yeah, it’s not black and brown paint on there but rather different stages of rust. Just be cautious and avoid removing any bolts until the left spring has been unwound. My brother-in-law actually lost a thumb that way. Best of luck
Dealing with garage door springs can be tricky. I no longer take on those jobs myself, but I am capable of repairing almost anything. If I were in your shoes, I would definitely call a professional for help.
Just got my garage door spring professionally replaced today for $400.00. When one side snapped on Sunday night, my wife and I were shocked by the sound!
It was so loud when it popped. I thought one of my cars in the garage got hit. I was sitting in a car in the driveway, about to hit the open button when I heard it and saw the door shake.
Our springs snapped just over an hour after we shut the door.
It’s not worth the risk to try doing it yourself! Leave it to the experts! Those springs are no joke!
For the cost and safety of having a professional take care of it for you, it’s definitely better than attempting it on your own, especially since I consider myself a pretty handy DIY guy.
To make sure you’re doing it right, always grab a pair of winding bars along with the springs you’re purchasing. I made sure to do this when I changed mine. I might not be a pro, but I’m not clueless either. If you ever feel like something is too risky, that’s a sign you should bring in a professional. Be aware of the potential hazards before getting started. Check out a few YouTube tutorials on how to do it properly and you’ll be fine.
‘t attempt it on your own… don’t worry about the rust, just give it a spray with some black paint.
I’m not really concerned about the rust, I just want to make sure I get the right size.
If you’re unsure about changing garage door springs, it’s best to leave it to the experts! This is a risky task that can be very dangerous if not done correctly. As Forest Gump wisely said, “stupid is as stupid does.”
Hey , can you clarify the size of the springs? The colors are a bit contradictory to me.
Let someone else handle it. Your life is invaluable, everything else can be replaced.
If you need the correct tools, just give someone a call.
Please refrain from touching these if you are unfamiliar with them.
Can you tell me the size of the springs?
Haha. It’s not a big deal. Plus, no one can accurately guess just by looking at them. You really need a gauge and tape measure. But hey, if you don’t want to take the advice of everyone here and prefer to risk injuring yourself, then go ahead. Have a wonderful day
Are you unsure about what you’re saying? I’m confused whether they’re brown or yellow. It’s supposed to be standard.